Showing posts with label wax. Show all posts
Showing posts with label wax. Show all posts

Sunday, July 18, 2010

Floating Candles and Preserving Extra Wax

After I finished making the beeswax lanterns I just blogged about, I still had a decent amount of wax left over. I didn't want to waste it, so I decided to make a few floating candles from Childhood Magic and In the Shade of the Old Oak Tree. I also made some little decorations using candy molds to preserve the rest. Ella really enjoyed helping with this!



First I took some homemade playclay and pressed it into thin pieces on an old cookie sheet. I then just barely pushed some metal cookie cutters into the playclay. This is to seal the bottom of the cookie cutters so your wax doesn't spill everywhere! I also decided to try putting in the wicks at this point, which worked great. I just barely pressed them into the playclay.


Next, I slowly poured the melted wax from my pyrex measuring cup into the cookie cutter molds. The cup is very, very hot, so be sure to use oven mitts! (See my previous post for tips on melting beeswax).

Ella really enjoyed chewing on the wicks during this process! I gave her a plate with some playclay and a couple of cookie cutters to make her own molds. She loved it!

I have some vintage candy molds passed down to me from my grandmother that I used to preserve the little bit of extra. I made little flowers (above) and...

CARE BEARS! Remember those? Notice the little discolored blob at the bottom of the bowl? That's where the first balloon from the lantern project burst and the water went into the cup of wax. I tried to avoid pouring it until the very last couple of molds, which worked just fine. Just be aware that whatever molds you pour the water into will not turn out properly; you'll just end up with some random chips of wax (which was fine with me because I was doing this to just preserve the wax until I remelt it and use it for another project).

It takes a bit for the wax to harden completely, and I was too nervous to move them into the freezer before they had set up. After they were fairly solid, though, I transferred them to the freezer and they hardened FAST! Removing them from the molds was super easy, too; just push them out and peel off the playclay! I only had difficulty removing one of the floral pieces, and that was resolved by running it under a little bit of warm water. It popped right out!

Here is a sampling of the candles and random pieces. The wicks in the circles are off center because I actually used a biscuit cutter (which has a handle that displaces the wick) and didn't think to cut the wick and place it properly before pouring the wax. Oh, well!

I put a candle and some of the flower pieces on the nature table along with the new beeswax lantern. I love it!

~Amanda

Beeswax Lantern

I woke up this morning full of energy and ready to create! I find so much inspiration from my very favorite blog, Childhood Magic. I've been collecting supplies for several projects from that blog, and I started many of them today. First, and the one I was most excited about, was the beeswax lantern. Before Ella woke up this morning, I went on a nature walk on my own and collected some lovely leaves and flowers. I pressed the flowers between sheets of paper towels in large books; I really should have pressed them longer, but I'm very impatient! Here is my photo journal (a light tutorial, I guess) of the process:

1. Chop beeswax into chunks. Hitting your fancy Henckels chef knife with a hammer does wonders.


2. Place said chunks into the nice pyrex measuring cup that your grandmother left you when she passed. This will make your mother really happy.

  
3. Melt the wax in a homemade double boiler. Pretend to be careful by using a thermometer, but ignore whatever temperature it reads.

  
4. Fill a water balloon with water and some air. Or, if you can't find a water balloon in your local store, use whatever balloons you can find. Act surprised when it pops the first time you dip it in wax. Then start over using TWO balloons (I used a chopstick to help insert one balloon inside the other).

  
5. Dip the balloon into the hot wax quickly and remove. Let harden for just a second, then dip again. Repeat this process about 20 times. If you are adding flowers and/or leaves to your lantern, dip them in the wax first and then gently (and carefully) press them onto the lantern form. Dip into wax at least a couple more times to seal them in.

  
6. Get your 12-year-old niece to pop the balloon over a pan using a pin.

  
7. Again, act surprised when the balloon explodes and water spills all over your lovely coffee table, stack of library books, and fancy TV remote. Pretend you don't know why the remote doesn't work when your husband gets home.

  
8. I forgot to get a picture of the next step, but it adds a really nice finishing touch if you press the bottom and top of the lantern against a warm pan to smooth the rough edges and make it stand without wobbling.

9. Place a tea light or small votive inside the lantern and enjoy the warm glow!

~Amanda